Contact Us

Phone: +8618912371408
Skype/Wechat: +8613801515020
TEL: +86-510-88206605
Fax: +86-510-88206605
Add: C-404, Xidongchuanggu, Xishan District, Wuxi, Jiangsu, China

Home > Exhibition > Content
Tire requirements and driving methods for 1500W lead-acid electric street scooters
Nov 29, 2018

The 1500W lead-acid electric street scooter is mainly based on the drive skateboard during the production process, and the four-wheeled vehicle with the power kit is added during operation. The current electric skateboards are generally divided into two-wheel drive and single-wheel drive. The most common transmission methods are: hub motor (HUB), and belt drive. The main power source is lithium battery pack.

1500W lead-acid electric street scooter In general, the mainstream control method of electric skateboard is wireless remote control mode to control the acceleration and braking of the electric skateboard. In use, the wireless connection mode of the skateboard host will have 2.4Ghz wireless connection and Bluetooth. The connection method is mainly. The way to control the turn is the same as that of the traditional skateboard control. The manipulating force and balance shifting make the wheel frame tilt to make a turn.

1500W lead-acid electric street scooter tires

1. Front wheel: The front wheel adopts a pneumatic tire size of 6 inches, which improves the overall comfort. Up to now, there is no puncture leak and tire repair.

2. The rear wheel, that is, the driving wheel, uses a solid tire. Everyone knows that there is almost no shock absorption effect on the solid. Fortunately, most of the urban roads are now asphalt roads. The advantage is that there is no need to worry about the danger caused by the puncture. . Therefore, the specific internal structure, because there is no professional ability, it has not been studied; because of the safety considerations in design, the taxi speed needs to be 5 yards to respond.

Previous: Technical development situation and control technology of two-wheel electric patrol motorcycle

Next: Energy conversion and development requirements for 72V lithium battery electric motorcycle